This video shows the fully automatic end delivery system for can ends in a beverage filling line. It includes a  robotic de-palletiser, automatic un-wrapper, including suction device to remove paper scraps and dust, reversed end rejection, two or four roll pusher for a single or dual lane out-feed. Not shown here is the delivery conveyor to the seamer with gap control.
The press CM-100 was developed by a closure manufacturer with outstanding mechanical engineering experience and has proven itself many times in the production of metal closures.
The efficiency of your end making line is measured by converted ends coming from the conversion press. But what happens, if your liner has to be cleaned, the shell press has to change coils, the tooling needs adjustments? Don’t worry, our A and B balancer stacks trays full of ends in case the liner stops – and if the conversion press should ever stop, you fill the lined ends into trays and take them to the warehouse, until you can use them. Any ‘ifs’ can be handled, without needing people and without a robot.
To guarantee uninterrupted supply of can ends to highspeed can filling lines a buffer after unwrapping will keep the line running for as long as you specify.
Hydraulic Balers for scrap generated in 2-piece can making are an integral part of complete removal systems from Container Machinery.
When making cans and ends, you will produce lots of scrap. When your production requires speeds of 3,600 cpm and ends up to 5000 epm, you will drown in scrap unless you do something about it. We put together complete scrap removal systems, using well known suction / conveying systems to pick up the scrap at the point of scrap generation (cupper, trimmer, decorator) and take it to the scrap room.
We integrate a European model, which is built with great care and 60 yrs experience. A capacity of 3,600 cpm makes it the fastest one available. We sell and service it in Asia. We developed a palletiser for DRD cans, for up to 1,500cpm and a no-touch pattern, avoiding scratches by the open flange. Pallet heights up to 2000mm.
Pushers are a key ingredient in end handling. Our balancers for beverage end handling use 70 – 80 pushers in a typical installation!
Induction ovens are available in horizontal and vertical designs. These ovens save 70 – 80% of energy, compared to gas or electrically heated ovens. And no oven pockets and other maintenance on moving parts!
A first in end palletising: every end from one press is palletised on a distinct pallet. The four incoming lanes could of course come from a 4 lane conversion press – TRACEABILITY at its best!
We take over after the compound lining with conveyors, room for inspection stations for compound, curls, rivets, any desired parts of the ends at speeds up to 1500 epm, counting, bagging, palletising, strapping, wrapping. You just need to sell them and take them to the warehouse or the customer.
Ends coming from the production lines are accurately counted and pushed forward. A mechanical gripper transfers a stick of  ends to wrapping station.Then the  ends are wrapped  automatically in film.A manual by pass bagging  station for paper bags is included.
Wrappers and strapping equipment are examples of neccessary equipment for end of line packaging. These machines are not made by Container Machinery, but integrated into complete lines.
Simple C-frame presses with single or double sets of dies can make shells or drawn Slip Covers for fancy cans. The operations of blank / draw / outside curl can take place in one set of dies! No trim press or curlers needed. Save space, save money, save people. The technology is well proven, developed a generation ago in the US and is now being re-discovered for your benefit. Ask for a quote for your application!
The example shows a line for shallow drawn containers or drawn lids for the fancy can making industry.
To maximise material use, sheet feeders have to be able to handle the sheets forward and side-ways, called a Zick-Zack motion. Our feeder does that with precision, resulting in a skeleton width of 0,8mm. The feeder can handle motions for single and multipleDies. Programs are stored for various jobs.
A simple tool to make the job of loading stacks of ends or blanks manually into boxes a lot more efficient and comfortable.
Container Machinery supplies various models of can end unwrapping systems, to remove paper bags, paper wraps or shrink film material. The system includes vacuum suction and balers for paper or plastic materials.
End Feeding System for beverage can filling, incl. de-palletiser un-wrapper, buffer, feeder. The filler of the filling line must never stop! Every step of the end feeding process is backed up by a manual action
CM-Accessories and Spare Parts – Ejectors

Search Site

Check out our LinkedIn Account

OUR CUSTOMERS